slid

Metal roofing, with a washer and a rubber gasket, the tip - the drill, galvanized PAINTING IN ANY COLOR

screws used to secure the OMAX roof and facade (facing) of sheet metal to metal structures, as well as for fixing metal roofing sheets for the imposition of one another.
Screw washer is equipped with a rubber gasket EPDM. The maximum recommendedthickness of the material drilled at a diameter of 5.5 - 5.3 mm, 6.5 - 6.3 mm.

technical characteristics

designation	Surface hardness, HV	Llength, mm	Ppitch, mm	Cflange thickness, mm	Dfflange diameter, mm	e,mm	Khead height, mm	S sizeturnkeymm

5,5 х 19	min 560	18,00-20,00	1,80	1,00	10,00-11,00	8,71 MIN	5,25-5,40	7,78-8,00
5,5 х 25	min 560	24,00-26,00	1,80	1,00	10,00-11,00	8,71 MIN	5,25-5,40	7,78-8,00
5,5 х 32	min 560	30,75-33,25	1,80	1,00	10,00-11,00	8,71 MIN	5,25-5,40	7,78-8,00
5,5 х 38	min 560	36,75-39,25	1,80	1,00	10,00-11,00	8,71 MIN	5,25-5,40	7,78-8,00
5,5 х 51	min 560	49,75-52,25	1,80	1,00	10,00-11,00	8,71 MIN	5,25-5,40	7,78-8,00
5,5 х 64	min 560	62,75-65,25	1,80	1,00	10,00-11,00	8,71 MIN	5,25-5,40	7,78-8,00
5,5 х 76	min 560	74,50-77,50	1,80	1,00	10,00-11,00	8,71 MIN	5,25-5,40	7,78-8,00

designation	The hardness ofthe core, HV	Doutside diameter, mm	Dpdrill diameter, mm	Tthe length ofthe drill, mm	Dwdiameterwashers,mm	Arrubber thickness, mm	athickness ofwashers,mm	Approximate weight of1000.Kg

5,5 х 19	240-425	5,28-5,46	4,55-4,70	7,50-9,00	13,80-14,20	2,30-2,70	0,9-1,10	5,60
5,5 х 25	240-425	5,28-5,46	4,55-4,70	7,50-9,00	13,80-14,20	2,30-2,70	0,9-1,10	6,33
5,5 х 32	240-425	5,28-5,46	4,55-4,70	7,50-9,00	13,80-14,20	2,30-2,70	0,9-1,10	7,55
5,5 х 38	240-425	5,28-5,46	4,55-4,70	7,50-9,00	13,80-14,20	2,30-2,70	0,9-1,10	7,84
5,5 х 51	240-425	5,28-5,46	4,55-4,70	7,50-9,00	13,80-14,20	2,30-2,70	0,9-1,10	9,45
5,5 х 64	240-425	5,28-5,46	4,55-4,70	7,50-9,00	13,80-14,20	2,30-2,70	0,9-1,10	10,96
5,5 х 76	240-425	5,28-5,46	4,55-4,70	7,50-9,00	13,80-14,20	2,30-2,70	0,9-1,10	12,27

designation	Surface hardness, HV	Llength, mm	Ppitch, mm	Cflange thickness, mm	Dfflange diameter, mm	e,mm	Khead height, mm	S sizeturnkeymm

6,3 х 19	min 560	18,00-20,00	1,80	1,00	10,00-11,00	10.95 MIN	5,75-5,90	9,78-10,00
6,3 х 25	min 560	24,00-26,00	1,80	1,00	10,00-11,00	10.95 MIN	5,75-5,90	9,78-10,00
6,3 х 32	min 560	30,75-33,25	1,80	1,00	10,00-11,00	10.95 MIN	5,75-5,90	9,78-10,00
6,3 х 38	min 560	36,75-39,25	1,80	1,00	10,00-11,00	10.95 MIN	5,75-5,90	9,78-10,00
6,3 х 50	min 560	48,75-51,25	1,80	1,00	10,00-11,00	10.95 MIN	5,75-5,90	9,78-10,00
6,3 х 60	min 560	58,75-61,25	1,80	1,00	10,00-11,00	10.95 MIN	5,75-5,90	9,78-10,00
6,3 х 80	min 560	78,50-81,50	1,80	1,00	10,00-11,00	10.95 MIN	5,75-5,90	9,78-10,00
6,3 х 100	min 560	98,50-101,50	1,80	1,00	10,00-11,00	10.95 MIN	5,75-5,90	9,78-10,00
6,3 х 130	min 560	128,50-131,50	1,80	1,00	10,00-11,00	10.95 MIN	5,75-5,90	9,78-10,00
6,3 х 150	min 560	148,50-151,50	1,80	1,00	10,00-11,00	10.95 MIN	5,75-5,90	9,78-10,00

designation	The hardness ofthe core, HV	Doutside diameter, mm	Dpdrill diameter, mm	Tthe length ofthe drill, mm	Dwdiameterwashers,mm	Arrubber thickness, mm	athickness ofwashers,mm	Approximate weight of1000.Kg

6,3 х 19	240-425	6,03-6,25	5,40-5,55	8,00-9,50	15,80-16,20	2,30-2,70	0,9-1,10	7,42
6,3 х 25	240-425	6,03-6,25	5,40-5,55	8,00-9,50	15,80-16,20	2,30-2,70	0,9-1,10	8,40
6,3 х 32	240-425	6,03-6,25	5,40-5,55	8,00-9,50	15,80-16,20	2,30-2,70	0,9-1,10	9,50
6,3 х 38	240-425	6,03-6,25	5,40-5,55	8,00-9,50	15,80-16,20	2,30-2,70	0,9-1,10	10,40
6,3 х 50	240-425	6,03-6,25	5,40-5,55	8,00-9,50	15,80-16,20	2,30-2,70	0,9-1,10	12,60
6,3 х 60	240-425	6,03-6,25	5,40-5,55	8,00-9,50	15,80-16,20	2,30-2,70	0,9-1,10	14,00
6,3 х 80	240-425	6,03-6,25	5,40-5,55	8,00-9,50	15,80-16,20	2,30-2,70	0,9-1,10	17,30
6,3 х 90	240-425	6,03-6,25	5,40-5,55	8,00-9,50	15,80-16,20	2,30-2,70	0,9-1,10	20,20
6,3 х 100	240-425	6,03-6,25	5,40-5,55	8,00-9,50	15,80-16,20	2,30-2,70	0,9-1,10	24,00
6,3 х 130	240-425	6,03-6,25	5,40-5,55	8,00-9,50	15,80-16,20	2,30-2,70	0,9-1,10	40,00
6,3 х 150	240-425	6,03-6,25	5,40-5,55	8,00-9,50	15,80-16,20	2,30-2,70	0,9-1,10	45,00

Material: SteelS1022
Surface:Whitezinc7mkm
Coveringthe head: galvanizedor paintedinbase colorsof the roof
Coatingmetalparts,whitezinc
Pitch:a frequent
Head:HexheadD = 8
Tip:Drill№ 3

slid

Metal roofing, with a washer and a rubber gasket, the tip - the drill, galvanized PAINTING IN ANY COLOR

Production

Форма входа